TOPVIEW designs and manufactures 4, 5 and 6-sided cube LED displays for indoor and outdoor installations. Choose the side length, pixel pitch, number of active faces, mounting method and playback mode for your project.
This product is also known as a magic cube LED display, cube LED screen, LED screen cube or LED video cube display.
4 / 5 / 6 display facesIndoor and outdoorFixed or rotatingSame or different content
Content is visible from several directions
People approaching from different sides can see a display face without standing directly in front of one wall.
Open and overhead space becomes usable
A hanging or floor-standing cube can use positions where a conventional wall screen cannot be installed.
Different messages can run at the same time
Each face can show its own product, direction or campaign message when independent playback is selected.
The display is easier to notice
The three-dimensional shape stands apart from flat signs in atriums, retail areas and exhibition spaces.
A cube LED display screen can use four, five or six active faces. The correct structure depends on whether the bottom, top and rear faces are visible after installation.For spherical, cylindrical, circular and other non-standard structures, see our custom shape LED screen range.
Four vertical display faces. Suitable when the top and bottom are hidden by the mounting structure.
Four vertical faces plus the top. Often used for hanging or floor-standing positions viewed from above.
All six faces display content. Suitable for suspended, rotating or open-space installations.
Width, height and depth can be customized. For an LED cube display custom pattern, we confirm the artwork for each face before production.
Need a curved 360° display surface instead of flat display faces? Compare our spherical LED display.
As a cube LED display manufacturer and cube LED display supplier with our own cube LED display factory, TOPVIEW confirms the drawings and specifications before producing the frame, LED modules, wiring, assembly, testing and shipment packing.
TOPVIEW supports OEM projects as a cube LED screen manufacturer, cube LED screen supplier and OEM cube LED display supplier. The production photos above show our actual assembly, testing and packing process.
The following standard configurations come from TOPVIEW product data. Final resolution and weight depend on side length, pixel pitch, number of display faces and indoor or outdoor construction.View the TOPVIEW LED display factory tour for our general SMT, assembly, aging and packing process.
| Environment | Pixel Pitch | Side Length | Display Faces | Resolution | Weight |
|---|---|---|---|---|---|
| Indoor Desktop / Countertop Display | P2.5 | 320 mm | 4 sides/5 sides | 128 × 128 per face | 10 / 11 kg |
| Indoor | P2.5 | 480 mm | 4 sides/5 sides | 192 × 192 per face | 25 / 27 kg |
| Indoor | P3 | 384 mm | 4 sides/5 sides | 128 × 128 per face | 13 / 14 kg |
| Indoor | P3 | 576 mm | 4 sides/5 sides | 192 × 192 per face | 28 / 29 kg |
| Outdoor | P2.5 | 320 mm | 4 sides/5 sides | 128 × 128 per face | 13 / 15 kg |
| Outdoor | P3.91 | 500 mm | 4 sides/5 sides | 128 × 128 per face | 34 / 36 kg |
The frame keeps adjacent display faces at a 90° angle and aligns the visible edges where the faces meet. The service direction and protective structure then differ between indoor and outdoor models.If your project needs a conventional flat video wall instead of multiple display faces, compare our indoor LED display.
Indoor products use magnetic front-maintenance LED modules. The modules can be removed from the front with a service tool, so additional rear maintenance space is not required.
Outdoor products use a latch-secured front-maintenance structure. The service section can be released from the front, while the locking position, sealing and cable route are confirmed according to the outdoor installation.Available as a four- or five-face outdoor LED cube display screen, each unit uses project-specific sealing and cable routing. These details are confirmed for every outdoor LED cube screen before production.
Use central or overhead positions to present promotions to visitors coming from several directions.
Show product content, campaign visuals or directional information on different faces.
Use the geometric form for themed visual displays and public information.
Display company information, schedules and visitor guidance in open areas.
A desktop LED cube display or countertop LED cube display fits retail counters, showroom desks and exhibition tables. Choose a 4-side LED desktop cube display when the top is not visible, or a desktop rotating LED cube display to show content around the counter.
Select the installation method according to the load-bearing point, viewing direction, available service space and whether rotation is required.
A base or pedestal carries the screen load and sets the display height.
The cube is suspended from a load point approved for the finished screen and mounting parts.
The support connects directly to a wall, building column or project steel frame.
A motorized support can rotate a floor-standing or desktop LED cube display. Rotation speed, base clearance, power routing and maintenance access are confirmed for the project.
An LED dynamic display cube can play synchronized content across several faces or assign different content to individual faces. The selected controller depends on the number of faces, total resolution, signal source and whether scheduled or live content is required.
The faces show the same or coordinated content.
Each selected face can show different content.
Stored programs run according to a set schedule.
A processor accepts a live video source when required.
These LED cube display project examples show two compact indoor configurations produced for different commercial spaces.
A compact P1.86 desktop LED cube display was produced for a watch shop in Singapore. The screen measures 160 mm wide and 320 mm high and uses four active display faces. It can present watch advertisements and product visuals to customers approaching from different directions while occupying limited counter space.
A 320 × 320 mm indoor P2.5 LED cube display was produced for a bar in California, USA. The screen uses four side faces plus the top face, allowing promotional content to be seen from different positions inside the bar. Its compact size makes it suitable for an indoor commercial space where the available display area is limited.
This New Zealand shopping mall installed 11 suspended five-sided P2.5 cube LED displays. Green plants were placed on top, integrating the screens with the mall’s interior design without occupying floor space.
Quantity: 11 units | Pixel Pitch: P2.5 | Face Size: 640 × 640 mm | Resolution per Face: 256 × 256 pixels | Brightness: 600 cd/m² | Weight: 38 kg/unit | Installation: Suspended
Before ordering a cube LED display for sale, check that the quotation separates the standard display, custom structure, control equipment, mounting parts, spare parts and delivery services. Non-standard sizes, rotating systems, special mounting, additional weather protection or system integration should be listed separately.
Standard display package
Show the confirmed model, quantity and complete screen price
Custom structure
Quote non-standard frame, rotating system or special support separately
Control equipment
List the supplied controller, player or processor with model and quantity
Mounting parts
State whether the base, hanging parts, frame or motor is included
Spare parts and accessories
List spare modules, power supplies, receiving cards and cables with quantities
Packing, freight and on-site service
Separate wooden cases, shipping, taxes, installation and training
For projects that also require structure, transport and delivery responsibilities to be confirmed, see our creative LED display solution.
The main price factors are the selected configuration, mounting system, control equipment, packing and delivery destination.
No. Outdoor use requires a weather-protected structure and rear-maintenance access. Select the environment before the structure is confirmed.
The verified standard configurations use wooden-case packing. The packing quantity and shipping volume are confirmed with the final order.
TOPVIEW provides a two-year warranty. Spare parts and the service scope are listed in the quotation or contract.
Why are 45° beveled-edge LED modules used in a cube LED display?
Yes. All TOPVIEW indoor cube LED displays use GOB-treated LED modules. The transparent protective layer covers the LED surface and helps reduce damage caused by touching, dust, moisture and minor impacts during assembly, transportation and maintenance.Check whether the supplier can provide confirmed drawings, production photos, full-screen testing records, packing details and project-specific specifications before shipment.
Confirm the number of active faces, side length, pixel pitch, installation method, maintenance direction, control system and packing method.
Yes. TOPVIEW can confirm the drawing, structure, modules, control equipment, testing and packing according to the project requirements.
