TOPVIEW manufactures custom circular LED displays for retail stores, showrooms, stages and brand spaces. Indoor, outdoor, transparent, single-sided and double-sided options are available.
Indoor circular LED displays are designed for controlled lighting and close viewing distances. They are suitable for retail stores, shopping malls, exhibition halls and indoor stages.
Outdoor circular LED displays provide higher brightness and environmental protection for exterior installations. They are suitable for storefront signs, building façades and outdoor brand advertising.
Transparent circular LED displays allow light and part of the background to remain visible through the display surface. They are suitable for indoor windows, exhibition spaces and creative brand installations.
A circular LED display uses a flat, fully round viewing area instead of a conventional rectangular format. It is normally specified by diameter and requires a structure designed around the circular display surface.For projects requiring a three-dimensional curved surface, explore our spherical LED display.
The visible display area forms a complete circle rather than a conventional rectangle.
The main screen dimension is specified by diameter instead of width and height.
A circular LED display has a flat round surface. A spherical LED display uses a three-dimensional curved surface, while a ring LED display has an open center.
As part of our custom-shaped LED display range, TOPVIEW provides OEM and ODM services for distributors and brand partners that require custom circular LED displays.The process covers requirement confirmation, technical proposal, production, inspection and shipment.
OEM/ODM process includes:
Circular LED displays can be built with one or two display faces. The correct structure depends on the viewing direction, available installation space, load-bearing capacity and whether both sides need to display content.
A single-sided circular LED display has LED modules on one display face, while the power supplies, receiving cards and wiring are housed behind the screen. It is intended for projects where viewers approach from one main direction.
Compared with a double-sided structure, it generally requires fewer components, less structural depth and lower load-bearing capacity.
A double-sided circular LED display has display surfaces on both the front and rear. The two sides can show the same content or different content when configured with a suitable control system.
It is intended for projects where viewers approach from two directions. The screen weight, structural depth, heat dissipation and load-bearing requirements must be confirmed during the technical design.
Circular LED screens can be integrated into commercial and entertainment spaces for branding, promotion and creative visual design. Each application requires different consideration of viewing distance, ambient light, mounting position and operating time.
Circular LED displays can present brand logos, product launches and promotional content in retail stores. The screen diameter and mounting height should allow the content to remain clearly visible from the main customer walkway.
Circular LED screens can be installed near showroom entrances, vehicle display areas or brand walls. Brightness and pixel pitch should be selected according to the showroom lighting and viewing distance.
Circular LED displays can be used as individual stage elements or arranged as part of a larger visual design. Rigging points, total screen weight and refresh rate should be confirmed before production.
Circular LED displays can provide decorative visuals and promotional content in bars and nightclubs. Brightness adjustment, ventilation and maintenance access should be considered for long operating periods.
The specifications above are based on reference configurations. Screen diameter, pixel pitch, installation structure and maintenance access can be customized according to the project requirements.
| Specification | Outdoor P2.5 Circular LED Display | Indoor P1.86 Circular LED Display | Transparent Circular LED Display |
|---|---|---|---|
| Application Environment | Outdoor | Indoor | Indoor |
| Screen Diameter | 1 m | 1.6 m | Customizable |
| Pixel Pitch | 2.5 mm | 1.86 mm | P3.91–P7.8 |
| Display Area | 0.785 m² | 2.01 m² | Based on Screen Diameter |
| Pixel Density | 160,000 pixels/m² | 288,888 pixels/m² | 32,768 pixels/m² |
| Module or Cabinet Size | Customizable | Customizable | 1000 × 500 × 65 mm |
| LED Type | SMD 3-in-1 | SMD 3-in-1 | SMD1921 |
| Brightness | 4500 cd/m² | ≥800 cd/m² | 2000 cd/m² |
| Transparency | — | — | 75% |
| Refresh Rate | 3840 Hz | 3840 Hz | ≥3840 Hz |
| Scan Mode | 1/32 scan | 1/32 scan | 1/16 scan |
| Viewing Angle | 140° | 140° | 120° |
| Screen Weight | 30 kg | 70 kg | 12 kg/m² |
| IP Rating | IP65 | To Be Confirmed | To Be Confirmed |
| Input Voltage | AC 110/220 V, 50–60 Hz | AC 110/220 V, 50–60 Hz | To Be Confirmed |
| Maximum Power Consumption | 680 W/m² | 680 W/m² | 400 W/m² |
| Average Power Consumption | 250 W/m² | 250 W/m² | 120 W/m² |
| Operating Temperature | To Be Confirmed | To Be Confirmed | –10°C to +40°C |
| Operating Humidity | To Be Confirmed | To Be Confirmed | 15%–90% RH |
| Control System | Mooncell | Mooncell | To Be Confirmed |
| Installation Method | Customizable for the Project | Customizable for the Project | Customizable for the Project |
| Maintenance Access | Front or Rear Service | Front or Rear Service | Front or Rear Service |
This gallery presents completed circular LED display installations produced according to different project dimensions, environments and installation requirements.
These videos show the water spray testing, power-on inspection and 3D video playback of custom circular LED displays.
The result depends mainly on the pixel pitch, screen diameter, viewing distance, module layout and the accuracy of the circular frame. Individual pixels may be visible at a very short viewing distance, especially when a larger pixel pitch is used. For close-viewing projects, the edge detail should be confirmed through the technical drawing or a sample before production.
Standard rectangular content can be played, but parts of the image may be cropped by the circular display area. For the best result, create the content according to the actual screen resolution and keep important text, logos and product images within the central circular safe area.
Rectangular LED displays can use standardized cabinets and production methods. A circular LED display normally requires a customized frame, module arrangement, structural processing and additional assembly work. The final price also depends on the diameter, pixel pitch, display sides, installation structure and order quantity.
The mounting structure and anchor points must be designed according to the actual screen weight, installation position and site load conditions. Structural drawings, connection hardware and load-bearing requirements should be confirmed before production and reviewed by a qualified local installer or engineer before installation.
Yes, when the display is configured with a compatible asynchronous control system and network connection. Depending on the project, content can be updated through Ethernet, Wi-Fi or 4G. The available control method should be confirmed in the technical proposal.
